[J. 12] Jason, H. and Ryu, J. (2024) “The association between musculoskeletal disorders and lead apron use in healthcare workers: A systematic review and meta-analysis”. Safety Science. https://doi.org/10.1016/j.ssci.2024.106669

[J. 11] Suresh V., Nimbarte A., Ryu J., Choudhury A. “Exploring the challenges and risks of dead body handling faced by healthcare professionals during the coronavirus pandemic: Cross sectional survey study” Applied Ergonomics. https://doi.org/10.1016/j.apergo.2024.104280

[J. 10] McFarland, T., Ryu, J., Haas, C., and Abdel-Rahman, E. (2023) “Crafting Safe and Efficient Masonry Practices: Quantitative Assessment of Postural Characteristics in Movement Strategies” ASCE Journal of Construction Engineering and Management. https://doi.org/10.1061/JCEMD4.COENG-13765. (Corresponding author)

[J. 09]      Rahman H., Ghasemi A., Dai F., Ryu, J. (2023) “Review of Emerging Technologies for Reducing Ergonomic Hazards in Construction Workplaces” Buildings. https://doi.org/10.3390/buildings13122967 (Corresponding author)

[J. 08]    Ryu, J., Banting, B., Abdel-Rahman, E. M., Haas, C. T. (2022) “Ergonomic Characteristics of Expert Masons” ASCE Journal of Construction Engineering and Management. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002434 (Corresponding author)

[J. 07]     Ryu, J., McFarland, T., Haas, C., and Abdel-Rahman, E. (2022) “Automated Clustering of Proper Working Postures for Phases of Movement”. Automation in Construction. https://doi.org/10.1016/j.autcon.2022.104223 (Corresponding author)

[J. 06]       Diraneyya, M., Ryu, J., Abdel-Rahman, E., Hass, C. (2021) “Inertial Motion Capture-Based Whole-Body Inverse Dynamics”. Sensors. https://doi.org/10.3390/s21217353 (Corresponding author)

[J. 05]     Ryu, J., Diraneyya, M. M., Haas, C. T., Abdel-Rahman, E. M. (2021) “Analysis of the Limits of Automated Rule-based Ergonomic Assessment in Bricklaying”. ASCE Journal of Construction Engineering and Management. http://doi.org/10.1061/(ASCE)CO.19437862.0001978 (Corresponding author)

[J. 04]     Ryu, J., McFarland, T., Banting, B., Haas, C. T., Abdel-Rahman, E. M. (2020) “Health and Productivity Impact of Semi-Automated Work Systems in Construction”. Automation in Construction.  https://doi.org/10.1016/j.autcon.2020.103396

[J. 03]     Ryu, J., Alwasel, A., Haas, C. T., Abdel-Rahman, E. M. (2020) “Analysis of Relationships Between Body Load and Training, Work Methods, and Work Rate: Overcoming the Novice Mason’s Risk Hump”. ASCE Journal of Construction Engineering and Management.  https://doi.org/10.1061/(ASCE)CO.1943-7862.0001889 (Corresponding author)

[J. 02]     Zhang, L., Diraneyya, M. M., Ryu, J., Haas, C. T., Abdel-Rahman, E. M. (2019) “Jerk as an indicator of Physical Exertion and Fatigue”. Automation in Construction. https://doi.org/10.1016/j.autcon.2019.04.016

[. J01]    Ryu, J., Seo, J., Jebelli, H., and Lee, S. (2018) “Automated Action Recognition Using an Accelerometer Embedded Wristband-Type Activity Tracker”. ASCE Journal of Construction Engineering and Management.  https://doi.org/10.1061/(ASCE)CO.1943-7862.0001579

[C18]        Rahman, H., Alam, N., Dai, F., and Ryu, J. (2024) “A Critical Review of Methods for Physical Fatigue Assessment for Construction Workers”. ASCE International Conference on Computing in Civil Engineering (i3CE), Pittsburgh, PA, July. 28 – 31, 2024.

[C17]       Yousif, I., Samaha, J., Ryu, J., and Harik, R. (2024) “Assessing Safety Programs and Strategies to Prevent Heavy Equipment Struck-by Incidents in Construction”. 52nd SME North American Manufacturing Research Conference, Knoxville, TX, June 17 – 21, 2024.

[C16]    David, K. and Ryu, J. (2024) “Assessing Safety Programs and Strategies to Prevent Heavy Equipment Struck-by Incidents in Construction”. Institute of Industrial and Systems Engineers (IISE) Annual Conference, Montreal, QC, Canada, May. 18 – 21, 2024.

[C15]     Rahman, H., Alam, N., and Ryu, J. (2024) “A Scientometric Exploration of Physical Fatigue and Risk Management in Construction”. Institute of Industrial and Systems Engineers (IISE) Annual Conference, Montreal, QC, Canada, May. 18 – 21, 2024. Won Best Paper Award.

[C14]     Ryu, J., McFarland, T., Hass, C., Abdel-Rahman, E. (2024) “Postural Assessment Criteria for Manual Material Handling”. Construction Research Congress 2024. https://doi.org/10.1061/9780784485293.064

[C13]    Ryu, J., Diraneyya, M., Abdel-Rahman, E., Hass, C. (2022) “Development of An Ergonomic Assessment Module Using Whole-Body Inverse Dynamics”. 49th Canadian Society for Civil Engineering Conference.

[C12]     Zhao Y., Ryu, J., Hass, C. (2021) “Virtual Reality Platform for 3D Irregular Packing Problem”. 28th International Workshop on Intelligent Computing in Engineering. Berlin, Germany. http://dx.doi.org/10.14279/depositonce-12021

[C11]     Ryu, J., Hass, C., Abdel-Rahman, E. (2021) “Performance and Ergonomic Characteristics of Expert Masons”. 48th Canadian Society for Civil Engineering Conference. Niagara Falls, Ontario, Canada.

[C10]      Ryu J., McFarland, T., Banting, B., Haas, C., Abdel-Rahman, E. (2021) “Semi-Automated Work System in Masonry Work”. 14th Canadian Masonry Symposium, Montreal, Montreal, Quebec, Canada.

[C09]    McFarland, T., Mahmassani, A., Ryu J., Banting, B., Haas, C., Abdel-Rahman, E. (2021) “Development and Implementation of Automated Apprentice Assessment Tool for Manual Handling Tasks in Masonry”. 14th Canadian Masonry Symposium, Montreal, Quebec, Canada.

[C08]     Ryu, J., McFarland, T., Haas, C., and Abdel-Rahman, E. (2020), “Automatic Clustering of Proper Working Posture”. 27th International Workshop on Intelligent Computing in Engineering, Berlin, Germany. (Best Paper Award) http://dx.doi.org/10.14279/depositonce-9977 

[C07]     Ryu, J., Zhang, L., Diraneyya, M, Banting, B., Haas, C., and Abdel-Rahman, E. (2019) “Ergonomic assessment of standard vs. heavy-weight CMU lifts”. 13th North American Masonry Conference, Salt Lake City, Utah.

[C06]   Zhang, L., Diraneyya, M, Ryu, J., Haas, C., and Abdel-Rahman, E. (2019) “Automated Monitoring of Physical Fatigue Using Jerk”. 36th International Symposium on Automation and Robotics in Construction (ISARC), Banff, Alberta, Canada. https://doi.org/10.22260/ISARC2019/0132

[C05]     Ryu, J., Zhang, L., Haas, C., and Abdel-Rahman, E. (2018) “Motion Data Based Construction Worker Training Support Tool: Case Study of Masonry Work” 35th International Symposium on Automation and Robotics in Construction (ISARC). Berlin, Germany. https://doi.org/10.22260/ISARC2018/0150

[C04]     Zhang, L., Diraneyya, M, Ryu, J., Haas, C., and Abdel-Rahman, E. (2018) “Assessment of Jerk as a Method of Physical Fatigue Detection”. 38th International Design Technical Conference and Computers and Information in Engineering Conference (IDETC/CIE), ASME. Quebec City, Quebec, Canada.  https://doi.org/10.1115/DETC2018-86289

[C03]     Alwasel, A., Ryu, J., Abdel-Rahman, E., Haas, C. (2017) “Improving Health and Productivity of Construction Workers: A New Toolkit”. 13th Canadian Masonry Symposium. Halifax, Nova Scotia, Canada.

[C02]     Hwang, S., Seo, J., Ryu, J., and Lee, S. (2016) “Challenges and Opportunities of Understanding Construction Worker’s Physical Demands through On-Site Energy Expenditure Measurement Using Wearable Activity Tracker”. Construction Research Congress 2016 (ASCE), San Juan, Puerto Rico.  https://doi.org/10.1061/9780784479827.272

[C01]     Ryu, J., Seo, J., Ryu, J., Seo, J., Liu, M., Lee, S., and Hass, C. (2016) “Action Recognition Using a Wristband Type Activity Tracker: Case Study of Masonry Work”. Construction Research Congress 2016 (ASCE), San Juan, Puerto Rico. https://doi.org/10.1061/9780784479827.080